By: Susan Bissonnette
No matter what time of year you visit the Grand Canyon, the scenery is spectacular. However, winter is especially dramatic because the visibility is so much better due to the climate conditions.
The best way to fully appreciate the Park during the height of its beauty is from the air. You can choose to tour by plane or chopper and depart from Vegas or Tusayan in Arizona.
You may be wondering which option is best when it comes to aerial tours of the Grand Canyon. For one thing, the tours by helicopter cost more. That's because each chopper only holds six passengers and the tours are more private.
Heli v.s. Plane
Next, helicopters fly at a lower altitude than airplanes. This is more important at the West Rim (more on rims in a minute) where helis can fly below the edge and land at the bottom. Since they can't do that at the South Rim, the choice between plane and chopper there is not so critical.
Then there's the issue of availability. Keep in mind, the helicopters only have room for six. Planes on the other hand can hold 19 people. For that reason, the chopper tours tend to fill up much quicker. Relatedly, if you are part of a large group, you might want to consider taking the plane because most or all of your party will fly together.
The window seats offer fantastic views and they are available in both types of aircraft. It will cost you more though. Further, window seats are not guaranteed and are only given at time of check-in to those passengers who requested them during the online booking process. However, most people don't even know you can request a window seat, you it doesn't hurt to go ahead and ask for one.
Window Seats
The weight of all the passengers has to be evenly distributed in a helicopter and that is why there is no guarantee you will get a window seat until everyone checks in on the day of the tour. That's not the case with airplane tours, and it is usually easier to get a window seat on one of those. Right now, window seats on helicopter tours cost $50 extra and those on airplane tours cost $10 extra.
The aerial tours go to both rims of the canyon. The Grand Canyon has two destination points for tours, one is the South Rim and the other is the West Rim. Vegas is situated near the West Rim. You can get there by plane in a half an hour and by chopper in 45 minutes. You can't actually take a chopper from Vegas to the South Rim because it is too far away. Instead, you can go by airplane and get there in about an hour. The airplane tours at the South Rim originate at the Grand Canyon National Park Airport and tour the southern section of the park.
The tours out of Las Vegas are available as air-only tours and landing tours. The air-only tours cost less. The landing tours are worth the money though because they let you experience the canyon up close while you have some fantastic adventures. One tour that I'm fond of is the West Rim airplane flight with optional Grand Canyon Skywalk. As for the South Rim, there's only the aerial and for the money it's excellent.
Wrapping Up
Winter is simply a wonderful time to schedule an air tour of the Grand Canyon. There are several types of tours to choose from and you can depart from Las Vegas or Tusayan, Arizona. It is worth a special trip just to go to the canyon, but if you will be in Arizona or Vegas on vacation anyway, don't miss the chance to take an air tour. You will see many beautiful sights and make memories to last forever.
Article Source: http://www.ArticleBiz.com
18 December 2013
12 December 2013
Energy-Saving & Environment Friendly Led Light Bulbs
by: Green Sim
Technological advancement is only possible through constant research and innovations. The latest example of such progress is the LED light bulb. Most research is carried out in order to find a way of improving the performance of an existing facility or to find a new product that will prove to be more economical and more efficient than the existing facility.
Positive Aspects of LED Light Bulbs
LED light bulbs have been developed to take the place of incandescent light bulbs or halogen light bulbs because they save energy, their efficiency is nearly double that of normal halogen bulbs and they do not have any harmful substance such as mercury. Moreover, these bulbs are environment-friendly because they can be recycled and they do not produce any heat. The durability and life expectancy of LED bulbs is in the region of 50,000 hours, which is much higher than that of the earlier bulbs. As such, once you have installed these LED light bulbs, you can forget about any cost of replacing them in the near future.
Energy-Saving Feature
The earlier incandescent or halogen light bulbs used to dissipate a large amount of energy by producing heat. This meant that the electricity bill was unnecessarily high. LED light bulbs have been created after a lot of research to eliminate the energy wasted due to heating, This has resulted in the creation of the latest innovative LED bulbs that do not produce any heat and consequently use much less energy to light up a room.
Whereas the halogen bulbs were using 85% of the electrical energy to produce heat and only the 15% balance was being used to produce light, the LED light bulbs utilize 90% of the electrical energy to produce light. Halogen bulbs were fitted with filaments through which electricity was passed in order to produce light but these filaments heat up and consume nearly 90% of the electricity for heating. In the case of LED bulbs, which use light emitting diodes for producing light, almost the entire electrical energy is converted into light energy without wasting any energy for heating. By using LED bulbs you can save 80% of your previous electricity bill. By using the LED bulbs you can make sure that you are contributing towards lessening global warming because no heating from the bulb is being dissipated into the atmosphere.
Cost Aspect
Although LED bulbs are more expensive than the halogen bulbs, it is almost a one-time expense because these bulbs have a long life, which means they do not need to be changed for a long time. The extra initial cost will easily pay for itself over the years. Moreover, since these bulbs use so little energy, they are environment friendly and do not add to pollution. The LED light bulbs have standard bulb fitting features making them convenient to install and replace anywhere.
GU10 LED Bulbs
GU10 LED bulbs are the most common replacement LED bulbs. Though they are similar to the normal LED bulbs, they have many similar LED lights placed in one fitting. GU10 LED bulbs have a specific type of fastening and in most commonwealth countries such as the UK, New Zealand and Australia; the standard fastening is the bayonet mount. These types of LED light bulbs are mostly used in offices, shops, commercial spaces and in showrooms. They are high in style and efficiency.
Article Source:http://www.articlecity.com
Technological advancement is only possible through constant research and innovations. The latest example of such progress is the LED light bulb. Most research is carried out in order to find a way of improving the performance of an existing facility or to find a new product that will prove to be more economical and more efficient than the existing facility.
Positive Aspects of LED Light Bulbs
LED light bulbs have been developed to take the place of incandescent light bulbs or halogen light bulbs because they save energy, their efficiency is nearly double that of normal halogen bulbs and they do not have any harmful substance such as mercury. Moreover, these bulbs are environment-friendly because they can be recycled and they do not produce any heat. The durability and life expectancy of LED bulbs is in the region of 50,000 hours, which is much higher than that of the earlier bulbs. As such, once you have installed these LED light bulbs, you can forget about any cost of replacing them in the near future.
Energy-Saving Feature
The earlier incandescent or halogen light bulbs used to dissipate a large amount of energy by producing heat. This meant that the electricity bill was unnecessarily high. LED light bulbs have been created after a lot of research to eliminate the energy wasted due to heating, This has resulted in the creation of the latest innovative LED bulbs that do not produce any heat and consequently use much less energy to light up a room.
Whereas the halogen bulbs were using 85% of the electrical energy to produce heat and only the 15% balance was being used to produce light, the LED light bulbs utilize 90% of the electrical energy to produce light. Halogen bulbs were fitted with filaments through which electricity was passed in order to produce light but these filaments heat up and consume nearly 90% of the electricity for heating. In the case of LED bulbs, which use light emitting diodes for producing light, almost the entire electrical energy is converted into light energy without wasting any energy for heating. By using LED bulbs you can save 80% of your previous electricity bill. By using the LED bulbs you can make sure that you are contributing towards lessening global warming because no heating from the bulb is being dissipated into the atmosphere.
Cost Aspect
Although LED bulbs are more expensive than the halogen bulbs, it is almost a one-time expense because these bulbs have a long life, which means they do not need to be changed for a long time. The extra initial cost will easily pay for itself over the years. Moreover, since these bulbs use so little energy, they are environment friendly and do not add to pollution. The LED light bulbs have standard bulb fitting features making them convenient to install and replace anywhere.
GU10 LED Bulbs
GU10 LED bulbs are the most common replacement LED bulbs. Though they are similar to the normal LED bulbs, they have many similar LED lights placed in one fitting. GU10 LED bulbs have a specific type of fastening and in most commonwealth countries such as the UK, New Zealand and Australia; the standard fastening is the bayonet mount. These types of LED light bulbs are mostly used in offices, shops, commercial spaces and in showrooms. They are high in style and efficiency.
Article Source:http://www.articlecity.com
Subscribe to:
Posts (Atom)